5 Tips And Techniques For Sanding in Ft. Washington, PA

In any given painting project, there is likely to be some element of sanding going on at various stages of the project.

You are going to be aware of this because you will know that in order to have a smooth surface, one thing that you will be able to do is to sand the surface, as doing so can make for a smooth surface that will be more adhesive to both primer and paint.

The good thing that you should know is that when you are well educated on the ins and outs of the process of sanding, you can do an even better job and as such, get better results overall with your painting project.

Let’s now look at and consider five tips and techniques for sanding in Ft. Washington, PA.

1. Hand And Power Tools Use

There are two basic kinds of sandpaper that you’re going to be able to find — sandpaper that you’ll use manually, and power tools that make use of sandpaper to sand the surface with the strength of the power tool behind it.

You’ll find that in any given painting project, it will be possible to make use of manual sanding for the entire project but it will be not so easy to use an electric sanding tool for an entire project, being that there are places where you won’t be able to reach at all using an electric sanding tool.

However, you should try to make use of an electric sanding tool if it is at all possible because the power of the electric sanding tool is quite incomparable and ultimately it will take you so much less time when using the electric tool.

2. Furniture Should Be Removed First

When you’re in the process of getting ready to sand the surfaces that you are going to later paint, you should really think about first removing as much of the furniture as you can from the room.

The reason that this is the case is that it can really get in your way and make the sanding process more difficult, and additionally, you may accidentally collide with the furniture while holding the electric sander and possibly cause damage to it — something you should try to avoid in any way that you can.

3. Grit Counts

Though you might go to the store where you purchase sandpaper and think that just about anyone will do for your painting project, this is not at all the case.

Particularly, you should be well aware that you should start off with lower grits to get you started, and then work your way up to higher grits, such as 100 and higher, to get the surface more smooth.

The general principle of the matter is that higher grits are equal to finer sanding and the reverse is true as well.

4. Circular Motions Are Best

Even though you might look up some sanding videos for getting information on the techniques to use and come away with the thought that any kind of sanding is going to be fine, you are better off moving your sanding tool in a circular motion.

It’s a bit like how you may remember wax being applied in a certain famous film that was ostensibly about learning karate!

5. Tack Cloth To Clean Afterward

Lastly, you should make sure that you use a tack cloth to clean up after you are done sanding — it’s going to be one of the best ways that you’re going to get the sanding dust off of the surfaces that you are cleaning.

You should also of course vacuum any areas where you see the sanding dust but to pick up the loose sanding dust.

Hiring a professional painting contractor like Aspen Painting is the guarantee of a flawless, durable, and high-quality paint job.
We have years of experience in cabinet and furniture painting and staining with a long list of happy customers in Horsham, PA, Ambler, Dresher, Ft. Washington, and Blue Bell, PA.
Call us today on 215-773-8422 for a FREE estimate to get started.
Related: 7 Tips And Tricks For Painting Your Kitchen Cabinets in Ambler, PA
Kitchen Cabinet Painting: Color Tips and Ideas