How to Remove Mildew and Lichen from a Wooden Fence

fence repainting

To remove lichen, mold, or mildew from a wooden fence, rinse it with a pressure washer on a low setting, scrub any remaining spots with a diluted bleach solution, rinse again, and let the wood dry. Then seal, stain, or paint the fence so the growth is slower to return.

Lichen vs. mold vs. mildew

  • Lichen is a crusty or leafy gray-green growth that clings tightly to the wood.
  • Mold shows up as dark, fuzzy, or slimy patches and can work its way into the wood.
  • Mildew is a flat, powdery film, usually gray or white, that sits on the surface.

All three thrive on damp, shaded wood, and the same cleaning steps work for each.

Before you start

  • Wear gloves and eye protection.
  • Cover nearby plants with tarps or upturned buckets, or prune and tie them back.
  • Never mix bleach with ammonia or other cleaning products.
  • Test your method on a small, hidden part of the fence first.
  • Pick a dry, sunny day so the fence dries quickly afterward.

Method 1: Pressure washer

  1. Set the washer to a low-pressure setting.
  2. Stand about 20 inches (50 cm) from the fence and sweep the spray slowly and evenly. Move closer only for stubborn areas, and do not hold the jet on one spot.
  3. If the growth is gone, let the fence dry. If spots remain, mix one part bleach with two parts water in a bucket.
  4. Scrub the remaining stains with a brush dipped in the solution, taking care not to splash plants.
  5. Rinse the scrubbed areas with the pressure washer.
  6. Once the wood is dry, sand any rough spots.

Method 2: Scrubbing by hand

  1. Mix one part bleach with two parts water in a bucket.
  2. Scrub the affected areas with a stiff brush soaked in the solution. A long-handled brush helps with high and low sections.
  3. Rinse thoroughly with a garden hose.
  4. Let the wood dry.
  5. Repair damaged boards, reset any nails or screws that stick out, and sand rough surfaces.

For heavy growth, hardware stores sell moss and mold cleaners made for wood. Follow the label and spot-test first.

How to keep lichen and mildew from coming back

  • Apply a wood sealer, stain, or paint once the fence is clean and dry. Not sure which? See whether to paint or stain a wooden fence.
  • Trim plants near the fence so it gets more sun and air.
  • Rinse the fence from time to time, before growth builds up.

Prefer to leave it to a professional? Aspen Painting offers power washing and fence staining. Request a free estimate.

Book an Estimate!

Scroll to Top