7 Mistakes To Avoid While Painting Your Bathroom in Ambler, PA
When you’re looking to paint your bathroom, there are some things that can make for a painting project that is costly and perhaps cause major delays in the timeline.
The thing is that if you make the time to learn about these kinds of mistakes and subsequently avoid them, you can have a better painting experience and one that will likely cost you less without sacrificing quality.
Let’s look at seven mistakes to avoid while painting your bathroom in Ambler, PA
1.Not Removing Mold
When you’re looking to paint your bathroom, it’s important that you have to take the time to remove mold and mildew beforehand.
Unlike other things that are on the surface of the walls that are going to be painted, a surface that has mold or mildew on it needs to be vigorously cleaned before the mold or mildew spreads and gets worse.
One might think that just by painting one will take care of the issue just by painting but this is not the case at all — instead, what you’re going to do is make a bit of a mess that will ultimately get overtaken by the underlying mold and mildew.
The better thing to do is to actually clean the mold and make sure that it does not come back.
2.Not Painting With The Right Kind Of Paint
There are of course quite a few kinds of paint that one can use in the course of painting a house — there are some that are meant for interior painting and some that are better for exterior painting.
In the realm of interior paints, you are going to want to look for a paint that will be resistant to moisture.
With as much moisture that is present in a typical bathroom from its day to day use, it’s a good idea to have paint on the surface that will be protected from this kind of thing — moisture leads to the kind of thing that you looked to clean and eradicate earlier, mold and mildew.
3.Not Cleaning First
When you’re looking for mold and mildew, it should be part of the larger cleaning process that you will be doing while getting ready to paint your bathroom.
There are many reasons you’re going to want to clean the surfaces that are going to get painted, one of them being that you generally aren’t going to want to paint a dirty surface.
Having a clean surface is one of the important first steps to painting as it will provide you with a good surface on which you can paint.
If you want to properly paint your bathroom walls, you should sand the surfaces that are going to be painted before you paint them.
It’s good to sand them because a well sanded surface is going to be smoother and more receptive to being painted than one that is not sanded.
It’s not even something that requires a lot of sanding but it is certainly a good idea to sand the unpainted surface before you paint as well as perhaps sanding lightly between coats.
5.Not Thinking About Light For Color
When you’re considering the various elements of painting your bathroom, you should think about how the various possible colors that you are going to want to consider will look under a number of lighting conditions.
This is key to having a well painted bathroom because if you only think about how your color choice is going to look based on how the paint switches look in the store, you’re missing out on a lot of different looks that it will actually have in your real bathroom.
By taking small samples and painting a bit in your home, you will be able to see how it’s going to look in the real lighting conditions and so make a good decision.
6.Leaving The Electrical Outlet And Light Switch Plates
If you are looking to properly paint your bathroom, it’s a good idea to first remove the outlet and light switch plates — these can easily get paint on them during the painting process.
Instead of allowing the possibility of getting paint on these plates, you should remove the plates and then cover up the areas that had the plates with painter’s tape.
7.Painting Directly From The Paint Can
Lastly, it’s important that you do not paint directly from the paint can — there are many ways that you can paint that don’t involve painting from the paint can.
One such thing is making use of a paint tray for holding the paint — you can for example have a much easier time applying paint to your paintbrush and your paint roller when you are using a paint tray.
It’s also a lot less likely that you’re going to spill paint when you’re painting from a paint tray than if you paint directly from a paint can.
Hiring a professional painting contractor like Aspen Painting is the guarantee of a flawless, durable, and high-quality paint job.
We have years of experience in cabinet and furniture painting and staining with a long list of happy customers in Horsham, PA, Ambler, Dresher, Ft. Washington, and Blue Bell, PA.
Call us today on 215-773-8422 for a FREE estimate to get started.
Related: 7 Tips And Tricks For Painting Your Kitchen Cabinets in Ambler, PA
Kitchen Cabinet Painting: Color Tips and Ideas
Ray is an inspiring leader with a strong work ethic stemming from his exemplary upbringing in a caring and loving family environment. His parents modeled the importance of integrity and hard work to him and his siblings, values which Ray now instills in his teenage daughter. As the owner of Aspen Painting & Wallcovering, Inc., he leads by example by expecting nothing but the best from himself and his employees. His primary goal is to provide superior service and quality craftsmanship to each of his clients so that they become enthusiastic ambassadors for the company. Ray is a passionate team player who always strives to exceed expectations.